Post Construction - SoluCleaners LLC.JPG

CONSTRUCTION

SoluCleaners Post Construction cleaning usually follows a standard operating procedure, however we can customize our post construction cleaning service to accommodate the needs of our General Contractors. 

 

1. Rough Clean: During this initial phase we remove and clean all construction debris including dust, caulking, paint overspray and adhesives. Windows, sliding glass doors and glass partitions are all thoroughly cleaned. Typically, frames and mullions are included during this cleaning phase as well.

 

2. Final Clean: This phase begins with a repeat the all glass cleaning followed by an in-depth cleaning of all interior surfaces. At the completion of this phase the space is usually considered move-in ready. Areas to be detailed will consist of:

  • Cabinetry: each cabinet will be cleaned inside and out with a microfiber rag and a neutral cleaner and the tops will be vacuumed to remove any accumulated dust or debris

  • Bathrooms: all bathrooms are cleaned from top to bottom including floors, fixtures, tubs, showers, counters, mirrors and any wall tile.

  • Baseboards and Floors: Every baseboard and floor is detailed with the utmost care. We take every type of flooring into consideration when we choose a cleaning medium to ensure that no damage is caused.

3. Touch-Up Clean:  A week or so after the dust settles, we go back in and wipe down all horizontal surfaces to assure that all dust and debris is taken care of. Say goodbye to dirty walls and fingerprints that have accumulated on glass surfaces. We highly recommend this service after staging your property.